Deutsch | English
+ + + Dear customer, thank you for visiting our website. We hope, you enjoy studying the contents and you will find the required information. Your team from MOLLET + + +

The MOLOSvibro level indicator VF62 is suitable for full, demand or empty detection in bins or containers for powdery, granulated and grained bulk goods with a minimum density of 0.01 t/m³. The very compact design allows a reliable level indication even with limited mounting space.


Product features

  • Small mounting depth
  • Compact design
  • High sensitivity adjustable in three setting adjustments
  • No digging free within the bulk solids due to small vibration amplitude
  • Interface measurement possible
  • Good price-performance-ratio
  • Use in potentially gas and dust explosive atmospheres possible
  • High reliability
  • Maintenance-free continuous operation
  • Easy installation


Further information on ATEX

Supply voltage
20…250 V AC / DC
23.7 V DC
only with separate supply device
Capacity of the contact
5A / 250V AC
change-over contact, potential-free
Bulk goods temperature
-20 °C … +150 °C
Ambient temperature
-20 °C … +80 °C
Process pressure
-0,95 bar ... 10 bar
ATEX approval
ATEX II 1/2D Ex ta/tb IIIC T95 °C
ATEX II 1/2G Ex ia IIB T4 Ga
Response delay
1 second
Start of vibration
2 up to 5 seconds
Minimum density of material
0.02 kg/l (t/m3 )
optional from 0.01 kg/l
Process connection
R1 EN 10226 or N1 1" NPT
Aluminium coated RAL7001
Process connection, probe and rod
Stainless steel, 1.4301 / 304
Type of protection
IP66/IP67 according DIN EN 60529
separate round-housing
IP65 according DIN EN 60529
Mounting position
Technical data

The MOLOSvibro VF62 (earlier VF06) is an all purpose vibro level indicator for powdery, granulated and grained bulk goods up to a grain size of 10 mm. It indicates reliable and accurate the minimum or maximum levels especially in small bins. Therefore this level indicator is used in many industries: