The MOLOSflow FSM flow monitor detects faults in the transportation of bulk solids in pipelines, on conveyor belts, on drop plates, on chutes, behind screws or in similar conveyor systems at an early stage. It ensures that the transportation of powders, dusts, pellets and granulates runs smoothly and thus prevents system failures.
Applications
MOLOSflow FSM is a non-contact and universally applicable flow monitor for bulk solids of all kinds.
Product features that will convice you too
Non-contact flow monitoring
Reliable microwave principle
Application also possible in aggressive materials
High reliability
Maintenance-free continuous operation
Simple installation
Simple parameterisation on the device
Sensitivity, signal damping, switching hysteresis and filter function adjustable
MOLOSflow FSM51 All facts at a glance
Supply voltage
24 V DC (18 ... 30 V DC)
Signal contacts
1 potential-free changeover contact
1 normally open contacts for Ready
1 normally open contacts for Ready
Switching capacity
10 µA ... 1 A
Power consumption
approx. 80 mA at 24 V DC
Ambient temperature
-20 °C ... +60 °C
Process temperature
-20 °C ... +85 °C
Pressure in the container
up to 2 bar
(optional 25 bar)
Material
Housing
Stainless steel 304 (1.4301)
Sensor surface
PTFA (optional ceramic)
Transmission power
10 dBm
Connection terminals
maximum 1.5 mm² (pluggable)
Cable entry
Screw connect
2x M16 x 1,5
Type of protection
IP65
acc. DIN EN 60529
Weight
1,3 kg
Maintenance
none
Mounting position
any
Signaling
LED green
operation
LED yellow
switching output
Bargraph
signal strength