MOLOScode BUS components

MOLOScode BUS components
Data transmission via RS485 BUS

The coupling point data transmitted via an RS485 BUS can be translated into any common BUS protocol. The MOLOScode BUS components include BUS distributor, power supply unit and protocol converter. The BUS is routed from the distributor to the reader and back again and must not exceed a total length of 1,200 m. A maximum of 64 reading devices per BUS is recommended.

BUS distributor

Housing aluminum, RAL 7001
Supply voltage 7 V ... 9 V DC
1x 4-wire input (supply and RS485)
1x 2-wire outlet (RS485)
Connection of up to 8 KC-LG16M reading devices
Ambient temperature -20 °C ... +60 °C
Protection class IP66 according to DIN EN 60529

Power supplies

Housing aluminum, RAL 7001
Input voltage 12 V ... 24 V DC
Output voltage 4 x 8 V DC
Ambient temperature -20 °C ... +60 °C
Protection class IP66 according to DIN EN 60529

Protocol converter

Converts RS485 to the following protocols:
- PROFIBUS-DP
- PROFINET-PN
- EtherCAT
- EtherNet/IP
- Modbus-RTU
Supply voltage 12-30 V DC
Ambient temperature -25 °C ... +70 °C
DIN-rail mounting (EN 50022 standard)
Weight 150 g
WxHxD 27x144x98 mm