The bus line is guided to the read head and back again. The maximum length of the bus line is limited by 1.200 m. As the reading cycle is prolonged with any additional read head, maximum 48 read heads per bus are recommended. If you use these 48 read heads with unshortened cables, there are 240 m left for the bus line to the control. In order to realize a longer distance the cable of the read heads can be shortened.
Bus distributor with power supply (KC-BV08M-C5)
- Housing Aluminium, RAL 7001
- Supply voltage 12 V ... 24 V DC
- Power supply fuses M2 A
- Read device fuses M100 mA each
- Current consumption 50 mA per read device at 24 V DC
- Connection RS485 (2-Draht)
- Cable entry 10x metal cable glands M16x1,5
- 1x input 4-wire (power supply and RS485)
- 1x output 4-wire (9 V DC and RS485)
- up to 8 read device KC-LG16M
- Ambient temperature -20 °C ... +70 °C
- any mounting position
- Protection IP66 according DIN EN 60529
- no maintenance
Bus distributor (KC-BV08M-C0)
- Housing Aluminium, RAL 7001
- Supply voltage 7 V ... 9 V DC
- Read device fuses M100 mA each
- Current consumption 50 mA per read device at 24 V DC
- Connection RS485 (2-Draht)
- Cable entry 10x metal cable glands M16x1,5
- 1x input 4-wire (power supply and RS485)
- 1x output 2-wire (RS485)
- up to 8 read device KC-LG16M
- Ambient temperature -20 °C ... +70 °C
- any mounting position
- Protection IP66 according to DIN EN 60529
- no maintenance
Products
MOLOSsafe-Safety for silo filling process
MOLOSsafe offers maximum safety during pneumatic silo filling.