 |
Function of hose detection
- Installation of one RFID read device per tube coupling
- Installation of transponders at each hose coupling
- RFID-transponders are powered by the read device
- Transponder sends signals on request
- RFID read devices receive and check these signals
- Serial bus RS485 picks up the provided signals
- Signal analysis is done by the control
Explanation RFID
- RFID means Radiofrequency-Identification
- Contactless data transfer
- Elements: Transponder and RFID read head
- Transponder composed of transmitter and responder
 |
RFID-Reading Device (KC-LG16M-10)
- Housing Stainless steel 1.4571
- 10 m cable length
- Active surface PTFE
- Supply voltage 7 V ... 9 V DC
- Current consumption 50 mA
- Reading distance 1 ... 5 mm
- Serial interface RS485 (2-wire)
- Transmission rate 9600 Baud
- 8 data bits, 1 stop bit, no parity bit
- Ambient temperature -20 °C ... +70 °C
- Any mounting position
- Protection IP68 according DIN EN 60529
- No maintenance
- DOWNLOAD: appliance information
RFID-Transponder (KC-CT12M)
- Housing PTFE
- 5 years data preservation after the last reading
- Ambient temperature -20 °C ... +70 °C
- Any mounting position
- Protection IP68 according DIN EN 60529
- No maintenance
- DOWNLOAD: appliance information
Products
MOLOSsafe-Safety for silo filling process
MOLOSsafe offers maximum safety during pneumatic silo filling.